Post by account_disabled on Dec 30, 2023 5:29:32 GMT
Robotic mist spray (ULV) kills germs and viruses. Can answer the needs of areas at risk from contact. and scattering in the air As in the situation of the outbreak of coronavirus disease 2019 (COVID-19) in the new outbreak. Bringing the robot to work in the area can keep a good distance from the spraying radius. Uses two 55 ampere batteries and has a 12 volt and 24 volt battery charging circuit in the system. The power supply can work continuously for at least 150 minutes with a high speed fan. There is a camera to help you see while driving.
For technology related to robots, it consists of 3 parts Phone Number List Jet system: Start by using a solution that is effective in disinfecting. and has research results supporting it Inhibiting the spread of infection Use a system to create a liquid pressure of up to 12 bars and then pass through a small hole. From high pressure to atmospheric pressure, it causes the fragmentation into aerosols. Then deliver the solution with a high-speed air beam, causing the solution to spray 5-7 meters away. Robot system: structural design wheel positioning weight balancing In order to move the robot smoothly.
The setting the speed Can move in all areas Uses 2 fully pneumatic rubber wheels and is supplemented with 2 independent wheels. Electrical systems and communication systems: radio signals The range of control is 50 meters. In open space, there is a system to turn on and off, dispense liquid, and control the jet head in the desired direction. The robot's movement is controlled through a camera mounted on the front of the robot. To help the operator control it more easily. Asst. Prof. Dr. Sathaporn explained that in addition. Which is the electrical system of the robot divided into 2 parts.
For technology related to robots, it consists of 3 parts Phone Number List Jet system: Start by using a solution that is effective in disinfecting. and has research results supporting it Inhibiting the spread of infection Use a system to create a liquid pressure of up to 12 bars and then pass through a small hole. From high pressure to atmospheric pressure, it causes the fragmentation into aerosols. Then deliver the solution with a high-speed air beam, causing the solution to spray 5-7 meters away. Robot system: structural design wheel positioning weight balancing In order to move the robot smoothly.
The setting the speed Can move in all areas Uses 2 fully pneumatic rubber wheels and is supplemented with 2 independent wheels. Electrical systems and communication systems: radio signals The range of control is 50 meters. In open space, there is a system to turn on and off, dispense liquid, and control the jet head in the desired direction. The robot's movement is controlled through a camera mounted on the front of the robot. To help the operator control it more easily. Asst. Prof. Dr. Sathaporn explained that in addition. Which is the electrical system of the robot divided into 2 parts.